• Advertisement
Join the IT Notebook

Clonezilla - Running from a remote computer

Any software title released with a GNU/Linux distribution. Articles are posted in "Linux Distribution - Software Title - Subject" format.

Clonezilla - Running from a remote computer

Postby lmmtux » Thu Sep 04, 2014 1:04 pm

Clonezilla is an excellent image capturing and deployment solution. This article shows how to use it remotely, rather than sitting at the console of the PC that the operations are being performed on. It does not go in to detail on capturing and deploying images.


Preparation

You must turn the Clonezilla ISO beforehand, as this will be needed to boot to.
The PC must also have a CD drive and ability to boot to this drive.


Procedure

  1. Boot to the CD on the computer.
  2. At the first Clonezilla bootloader screen press Enter.
    clonezilla01.jpg
    clonezilla01.jpg (33.76 KiB) Viewed 2872 times
  3. Press Enter to accept the language.
  4. Press Enter to accept the keymap.
  5. Select the option "Enter_shell" and press Enter.
    clonezilla04.jpg
    clonezilla04.jpg (10.78 KiB) Viewed 2872 times
  6. Select "cmd" and press Enter.
    clonezilla05.jpg
    clonezilla05.jpg (12.85 KiB) Viewed 2872 times
  7. At the command prompt, enter the following command to start the SSH server:
    Code: Select all
    sudo service ssh start

    clonezilla06.jpg
    clonezilla06.jpg (4.99 KiB) Viewed 2872 times
  8. Type in the following command to start the network services:
    Code: Select all
    sudo ocs-live-netcfg

    The following box will come up and you can then select your network settings (most cases DHCP will work).
    clonezilla07.jpg
    clonezilla07.jpg (12.93 KiB) Viewed 2872 times
  9. The network configuration will come up if using DHCP, make a note of the IP address.
    clonezilla08.jpg
    clonezilla08.jpg (17.09 KiB) Viewed 2872 times
  10. Use a SSH client (Putty) to connect to the IP address above. The username and password are: user/live.
  11. In the SSH session, run this command to start Clonezilla:
    Code: Select all
    sudo clonezilla
  12. Follow the remaining steps to work with the images on the remote PC as desired.
lmmtux
 
Posts: 55
Joined: Mon Jul 30, 2012 9:40 pm
Reputation: 0

Return to Linux

cron